Nissan Forum - Nissan Enthusiast Forums

Nissan Forum - Nissan Enthusiast Forums (https://nissanforum.com/forum/)

- General Nissan Tech (https://nissanforum.com/forum/general-nissan-tech-9/)

- - 1995 ka24de (https://nissanforum.com/forum/general-nissan-tech-9/1995-ka24de-4865/)

hello im new to this site but i have a question .
i have a 1995 nissan altima gxe with the ka24de .
rebuilt head and timing chain overhaul kit .
i put a cold air intake on and i drilled holes for all of
my stock vacume hoses and sensors into the pipe so it runs and drives
but my question is when i start the car in the morning its starts right up but it dies .
i repeat it three times till it will stay running but idle is aradic and low at 400rpms.
how do i get it to run like it was with the stock intake and still have my gas millage i was getting ?

thanks any help would b great ...

Sounds like you don't have the MAF connected to the new intake correctly.If youbought an intake made for thealtima you shouldn't have had to drill holes.

i had a 85300zx and when it was cold wouldnt stay running during warmup unless i was giving it gas or had the heater running
you could try that but more than likely its ur maf