Nissan Forum - Nissan Enthusiast Forums

Nissan Forum - Nissan Enthusiast Forums (https://nissanforum.com/forum/)
-   General Nissan Tech (https://nissanforum.com/forum/general-nissan-tech-9/)
-   -   Spark Plug Technical Info (https://nissanforum.com/forum/general-nissan-tech-9/spark-plug-technical-info-2893/)

Linda_ol 10-14-2009 06:23 AM

Spark Plug Technical Info
 
Hi The black is an oily black substance on the spark plug, and the plug is not "ate up". Please get back to me soon. Thanks Jodie

bekham 10-27-2009 02:22 AM

well i must say it is a very informative and educative information posted here.a very good job is done keep up the spirit and keep posting such articles.

shircirsli 11-09-2009 03:09 PM

I accept with Nitrous 411 & FAQs


Nitrous Oxide is an efficient means of getting more oxygen into the combustion chamber. Initially the
N2O injection will cool the incoming charge due to the energy expended on vaporization into the air fuel mixture. However, do to the dramatic increase in power output, the sustained use of N2O increases cylinder temperatures to the point you may require a spark plug one or two heat ranges colder. If the nitrous is used only for very short bursts, (less than 10 seconds), then the standard plug can likely be used with no spark plug heat change necessary.

full house 11-09-2009 07:35 PM


Hi The black is an oily black substance on the spark plug, and the plug is not "ate up". Please get back to me soon. Thanks Jodie
sounds like everything is good!but still the problem occur.Weird!!

megan 11-17-2009 01:54 AM

Hey hi joined new and i have few questions will post it later.

sandolacey 11-21-2009 02:07 AM


Originally Posted by 2dr_sentra (Post 7236)
Very nice infomation. I am making this a sticky.

are you cereal right now?

Assunty09 11-26-2009 12:12 PM

Spark Plug Technical Info
 
Im planning on doing extensive plug testing somewhere down the road, itll be expensive, but whatev, itll be nice to know also, I say, so yeah.

Anyone know who has the indexing washers now?

Assunty09 12-18-2009 08:24 PM

Spark Plug Technical Info
 
Ive removed the plug wire from the cap, and held the end about a half inch away from the distributor contact.Removed the wire from the plug and held about half inch away from the spark plug, or engine block.And removed the plug from the head, and had the wire connected to the distributor and the plug...and held the plug about a half inch away from the block.But never removed the plug wire from the cap and held the end a half inch away from the body of the car as mentioned in the TSRM.

Deerept09 12-28-2009 07:26 AM

Spark Plug Technical Info
 
First off, my plans were to run a C.O.P system. I bought the plate and got some intrepid C.O.P with pigtails and ready to wire them up. Without the CDI box, I dont think it would be a good idea. Im having second thoughts on the C.O.P system.

Now onto spark plug wires. Ive read some bad reviews on some spark plug wires and good reviews on others. My goal is to hit at least 400hp for now with my setupbuilt bottem, 280 cams, 50 trim, 1600cc, 25psi, etc... and my future plans is to hit 700 which wont be for years. Ive read stock ignitions are good already so will OEM spark plug wires do me good? What would you recommend? Thanks.

lin_2008 03-24-2010 12:58 AM

Yellow stone diesel parts plant is one of the leading manufacturers
of engine parts, in particular diesel fuel injection system
accessories for replacement, such as Fuel injection Nozzle, Plunger and
Delivery valve, ETC In south of china .

for more detail please visit our website : www.yellowstonediesel.com
www.dieselinjection.cn

Yellow stone diesel parts plant was founded in 1997.Over the years,
Yellow stone has grown and gained a reputation for producing
high quality products and delivering them on time.
105015-5860
105015-5860
105015-5940
0 433 171 134
0 433 171 137
0 433 171 146
5611065 H60S30A538
5611650 BDL110S6133
5611735 BDL110S6267
6801082 6801082
6801087 6801087
6801088 6801088
DN10PDN130
DN0PDN121
HL176S27D525P2
2418455518 2455-518
2418455714 2455-714
9401087506 9087-506
134151-4120 P121
134151-4920 P129
134151-6420 P143
NOZZLE DENSO 093400-7690 DN10PDN129
NOZZLE DENSO 093400-7700 DN10PDN130
NOZZLE DENSO 093400-8220 DN0PDN121
131110-9320 131110-9420 131160-0320


All times are GMT -5. The time now is 12:48 AM.


© 2024 MH Sub I, LLC dba Internet Brands