1989 nissan pulsar no start
Hey everyone i got a 1989 nissan pulsar nx with a 1.6 sohc. i bought it in non running condition (for 100.00) I have compression in all cylinders. I have good fuel pressure. I have spark. I can spray carb cleaner down the throttle body and it will fire off instantly. my injector works and i verified that by running leads off the battery to the injector and it will spray fuel. I dont think the injector is operating when i try and start the car. I read the flash codes off of the ecm and says that everything is in good order (55). I checked continuity on all the circuits and everything checks out. I replace the crank angle sensor with no success. If anybody can help me out that would be great.
|
When the engine cranks normally but won't start, you need to check ignition, fuel and compression. Ignition is easy enough to check with a spark tester or by positioning a plug wire near a good ground. No spark? The most likely causes would be a failed ignition module, distributor pickup or crank position (CKP) sensors MR GASKET CARBURETOR COVER__________________________ Carburetor or line not included |
All times are GMT -5. The time now is 05:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands