Class III Hitch for '95 Pathfinder
 

Does anyone know of a class 3 hitch I can put on my '95 Pathfinder that would NOT require drilling? I'm looking for the easiest method to put one one.

It seems a lot of brands require drilling for 95's and older, and the 96's and newer do not.

Any help would be great!

RE: Class III Hitch for '95 Pathfinder
 

Ebay has some, but they don't specify if they require drilling.

RE: Class III Hitch for '95 Pathfinder
 

I installed a class III hitch on my 95 Pathfinder around Dec 2002, after searching around for the best price.
I don't know if it still is, or if they can order it for you, but the best deal I found at the time was Agri Supply Company, (800) 345-0169
http://www.agri-supply.com/HTML/5000000.htm

32679 EA 49
13095 NISSAN PATHFINDER
87-95 (NO DRILL) 2 & 4 DOOR
Class 3, 2"

When it arrived I found out it was from CURT Manufacturing Inc., # 13095. It was listed as "No Drill Application," but I soon discovered the bolts were too big for one of the holes in the frame, so it had to be enlarged.

The other issue was getting the bolts and support plates inside the frame. I used a dremel tool and enlarged a hole further up the frame into the shape of a bolt head so they would slide in. A long piece of wire with a spiral at one end that fit the bolts was included with the installation package that made it easy. Just put a plate on and a bolt in, fed the wire into the frame, then slid the plate down the wire into the frame, then maneuvered the bolt into the frame, and pulled the wire out the mounting hole and everything fell into place. I have been happy with it since day one and think that it has been and probably is one of the strongest parts on my truck (seven years newer than most of the rest).

Here is some of the rest of what I had in my notes:

http://www.hitchesonline.com/nissian...nder_87-95.htm
Sleek Design built to enhance the rear contour of the vehicle with 2" square receiver hitch opening. One piece construction for a stronger hitch and easier installation. Direct attachments allows hitch to be affixed well under vehicle for minimum visibility when ball mount is removed.
Class III & IV are rated to tow up to 6,000 lbs. Gross Trailer Weight (G.T.W.) and up to 1000 lbs. Tongue Weight (T.W.)
10,000 lbs. (G.T.W) and 1,200 lbs. (T.W.) with Weight Distributing (W.D.)


1-800-452-2967
http://www.pickup-accessories.com/hitches_towing/
Nissan Pathfinder - QS Hitch ?Mini?
1987-95 045
Class 3, part number 13095


http://kwikhitch.com/hitches/class_3_hitches.htm
25080 3 87-95 Nissan Pathfinder

http://www.truckxpressions.com/acces...hitchplugs.htm
http://www.truckxpressions.com/acces...ccessories.htm

Ozark Truck Outfitters
3504 S. Thompson
Springdale, AR 72764
(501) 750-0033
http://www.zhub.com/ozarktruckoutfit...stings/50.html (BAD LINK/GONE?)
Sure Pull # 25917 Hitch
Nissan Truck hitch, 4 wheel drive. 4000lb weight
carrying, 400lb tongue weight, 2 inch receiver. No drill
installation. Manufactured by Sure Pull. Installation
instructions and hardware included.
Class II Mini Hitches
"These hitches are scaled down versions of the big hitches, designed for today's smaller, lighter tow vehicles, yet capable of towing a fair sized load. They are rated at up to 3,500 lbs. and up to 300 lbs. on the included ball mount. Always check the vehicle's recommended towing capacity and NEVER exceed it."


Of course you could always check around locally with dealers/stores, etc. and I think one of, if not the original places for aftermarket Nissan Pathfinder parts was/is:

Automotive Customizers
1700 NW 22 Ct Unit 2
Pompano Beach, FL 33069
(954) 971-3510
http://www.4x4parts.com

"That's all I know about that."