|
No start 2008 Sentra
We just got a 2008 sentra and bought it believing it had sensor problems. The scan showed two codes: P0011 and P2A00. Before the crankshaft sensor was taken out the starter would wind but it wouldn't crank. Now it won't do anything no click, no wind, - nothing but a thump when the key is turned on but not all the way to start..You can run a wire directly from the battery to the starter and it will wind until the battery dies if you let it.Please someone know something that will help. Thanks in advance.BTW I ordered a sensor and when it came it, it did not fit, it would not bolt up and it was a guaranteed fit.
|
Well, no one had any answers but we now know exactly what the problem is. It needs a timing chain or belt whichever it takes. We just are not sure how involved the task is.
|
Cvt? 2 crank sensors!!!
Originally Posted by Littleirishred
(Post 37779)
We just got a 2008 sentra and bought it believing it had sensor problems. The scan showed two codes: P0011 and P2A00. Before the crankshaft sensor was taken out the starter would wind but it wouldn't crank. Now it won't do anything no click, no wind, - nothing but a thump when the key is turned on but not all the way to start..You can run a wire directly from the battery to the starter and it will wind until the battery dies if you let it.Please someone know something that will help. Thanks in advance.BTW I ordered a sensor and when it came it, it did not fit, it would not bolt up and it was a guaranteed fit.
there are two crank sensors once 90 degree to the plug and ones straight up and down. They are not interchangeable. |
| All times are GMT -5. The time now is 08:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands