2021 NISSAN ALTIMA Recalls
Recall information provided by National Highway Traffic Safety Administration
-
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Running Sequence Number: 249917
Campaign Number: 23V628000
Make: NISSAN
Model: ALTIMA
Year: 2021
MFR Campaingn Number: R23C3
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Nissan North America, Inc.
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 153376
Date Owner Notified: Oct 19, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Nissan North America, Inc.
Report Received Date: Sep 8, 2023
Record Creation Date: Sep 11, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Nissan North America, Inc. (Nissan) is recalling certain 2019-2021 Altima and 2020-2021 Sentra vehicles. Damage to the camera harness can cause distortion or loss of the rearview camera display image. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview camera that does not properly display an image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will inspect the rearview camera and harness for damage and replace them as necessary. If no damage is found, the dealer will apply protective tape and reroute the rearview camera harness. Repairs will be performed free of charge. Owner notification letters are expected to be mailed October 19, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R23C3.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125741004696768000001568
Manufacturer-Supplied Component Name: Rear View Monitor
Manufacturer-Supplied Component Description: Camera Assy ? Back View
Manufacturer-Supplied Component Part Number: 28442 6LA0A
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Running Sequence Number: 249918
Campaign Number: 23V628000
Make: NISSAN
Model: ALTIMA
Year: 2021
MFR Campaingn Number: R23C3
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Nissan North America, Inc.
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 153376
Date Owner Notified: Oct 19, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Nissan North America, Inc.
Report Received Date: Sep 8, 2023
Record Creation Date: Sep 11, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Nissan North America, Inc. (Nissan) is recalling certain 2019-2021 Altima and 2020-2021 Sentra vehicles. Damage to the camera harness can cause distortion or loss of the rearview camera display image. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview camera that does not properly display an image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will inspect the rearview camera and harness for damage and replace them as necessary. If no damage is found, the dealer will apply protective tape and reroute the rearview camera harness. Repairs will be performed free of charge. Owner notification letters are expected to be mailed October 19, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R23C3.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125741004696768000001568
Manufacturer-Supplied Component Name: Around View Monitor
Manufacturer-Supplied Component Description: Camera Assy ? Back View
Manufacturer-Supplied Component Part Number: 28442 6LA0B
Do Not Drive: No
Park Outside: No
-
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Running Sequence Number: 249920
Campaign Number: 23V628000
Make: NISSAN
Model: ALTIMA
Year: 2021
MFR Campaingn Number: R23C3
Component Name: BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Manufacturer: Nissan North America, Inc.
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 153376
Date Owner Notified: Oct 19, 2023
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Nissan North America, Inc.
Report Received Date: Sep 8, 2023
Record Creation Date: Sep 11, 2023
Regulation Part Number: N/A
Federal Motor Safety Standard Number: 111
Summary: Nissan North America, Inc. (Nissan) is recalling certain 2019-2021 Altima and 2020-2021 Sentra vehicles. Damage to the camera harness can cause distortion or loss of the rearview camera display image. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."
Consequence: A rearview camera that does not properly display an image can reduce the driver's rear view, increasing the risk of a crash.
Remedy: Dealers will inspect the rearview camera and harness for damage and replace them as necessary. If no damage is found, the dealer will apply protective tape and reroute the rearview camera harness. Repairs will be performed free of charge. Owner notification letters are expected to be mailed October 19, 2023. Owners may contact Nissan's customer service at 1-800-867-7669. Nissan's number for this recall is R23C3.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Component ID: 000125741004696768000001568
Manufacturer-Supplied Component Name: Around View Monitor
Manufacturer-Supplied Component Description: Camera Assy ? Back View
Manufacturer-Supplied Component Part Number: 28442 6CA0A
Do Not Drive: No
Park Outside: No
-
STEERING: LINKAGES: TIE ROD ASSEMBLY
Running Sequence Number: 195432
Campaign Number: 21V138000
Make: NISSAN
Model: ALTIMA
Year: 2021
MFR Campaingn Number: PC795
Component Name: STEERING: LINKAGES: TIE ROD ASSEMBLY
Manufacturer: Nissan North America, Inc.
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 2407
Date Owner Notified: Mar 31, 2021
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Nissan North America, Inc.
Report Received Date: Mar 4, 2021
Record Creation Date: Mar 5, 2021
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Nissan North America, Inc. (Nissan) is recalling certain 2020-2021 Nissan Altima vehicles. The tie rod ball joint fastener was not tightened properly, which could result in the tie rod ball joint detaching from the steering knuckle.
Consequence: A detached tie rod ball joint can cause a loss of steering control, and increase the risk of a crash.
Remedy: Nissan will notify owners, and dealers will tighten the left and right-side tie rod ball joint fasteners, or install new fasteners as necessary, free of charge. The began March 31, 2021. Owners may contact Nissan customer service at 1-800-867-7769. Nissan's number for this recall is PC795.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Component ID: 000109248004696768000000020
Manufacturer-Supplied Component Name: WASHER
Manufacturer-Supplied Component Description: Washer
Manufacturer-Supplied Component Part Number: 13-11 01251
Do Not Drive: No
Park Outside: No
-
STEERING: LINKAGES: TIE ROD ASSEMBLY
Running Sequence Number: 195438
Campaign Number: 21V138000
Make: NISSAN
Model: ALTIMA
Year: 2021
MFR Campaingn Number: PC795
Component Name: STEERING: LINKAGES: TIE ROD ASSEMBLY
Manufacturer: Nissan North America, Inc.
Begin Date of Manufacturing: N/A
End Date of Manufacturing: N/A
Vehicle, Equipment or Tire Report: V
Potential Number of Units Affected: 2407
Date Owner Notified: Mar 31, 2021
INFLUENCED_BY: MFR
Manufacturers of Recalled Vehicles: Nissan North America, Inc.
Report Received Date: Mar 4, 2021
Record Creation Date: Mar 5, 2021
Regulation Part Number: N/A
Federal Motor Safety Standard Number: N/A
Summary: Nissan North America, Inc. (Nissan) is recalling certain 2020-2021 Nissan Altima vehicles. The tie rod ball joint fastener was not tightened properly, which could result in the tie rod ball joint detaching from the steering knuckle.
Consequence: A detached tie rod ball joint can cause a loss of steering control, and increase the risk of a crash.
Remedy: Nissan will notify owners, and dealers will tighten the left and right-side tie rod ball joint fasteners, or install new fasteners as necessary, free of charge. The began March 31, 2021. Owners may contact Nissan customer service at 1-800-867-7769. Nissan's number for this recall is PC795.
Notes: Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Recall Component ID: 000109248004696768000000020
Manufacturer-Supplied Component Name: NUT
Manufacturer-Supplied Component Description: Nut
Manufacturer-Supplied Component Part Number: 89-12442-1A
Do Not Drive: No
Park Outside: No