Maxima trouble
#1
Maxima trouble
Hey folks, this is my first time posting here so please be forgiving :-). I'm in desperate need of some tech help if anyone can give me a hand.
I bought a 97 Maxima in March of this year with 200k miles. I drove it for a while but the clutch wore out and I needed to get it replaced. At the same time, I replaced the left front drive axle as that was worn out, as well.
After the work had been done, the car wouldn't start. All electrical connections were put back in place, and the engine would turn, but it wouldn't fire.
We removed the Crankshaft sensor and dusted it off. After putting it back in, the car started.
We shut off the engine after a few minutes and tried it again. No fire. Once again. No fire. We took the battery out and replaced it with a newer one. Tried that. It started up fine. We drove it out of the garage and up and down the driveway a few times. It drove perfectly, indicating the clutch was installed fine. After shutting off the engine, it wouldn't start again.
Long story short, on some occasions, the engine will fire, while on others, it will not. All of the times it started were not related to each other.
Looking at the trouble codes, we've found the following:
Mass Air Sensor malfunction or circuit fault
Crankshaft POS malfunction or circuit fault
Crankshaft REF malfuction or circuit fault
Any clues on what could be happening? We've also tried a timing light and one time it showed fire, but ever since then, there's been nothing happening.
If anyone can clue me in, it would be a GREAT help. Thanks a bunch.
Matt
I bought a 97 Maxima in March of this year with 200k miles. I drove it for a while but the clutch wore out and I needed to get it replaced. At the same time, I replaced the left front drive axle as that was worn out, as well.
After the work had been done, the car wouldn't start. All electrical connections were put back in place, and the engine would turn, but it wouldn't fire.
We removed the Crankshaft sensor and dusted it off. After putting it back in, the car started.
We shut off the engine after a few minutes and tried it again. No fire. Once again. No fire. We took the battery out and replaced it with a newer one. Tried that. It started up fine. We drove it out of the garage and up and down the driveway a few times. It drove perfectly, indicating the clutch was installed fine. After shutting off the engine, it wouldn't start again.
Long story short, on some occasions, the engine will fire, while on others, it will not. All of the times it started were not related to each other.
Looking at the trouble codes, we've found the following:
Mass Air Sensor malfunction or circuit fault
Crankshaft POS malfunction or circuit fault
Crankshaft REF malfuction or circuit fault
Any clues on what could be happening? We've also tried a timing light and one time it showed fire, but ever since then, there's been nothing happening.
If anyone can clue me in, it would be a GREAT help. Thanks a bunch.
Matt
#3
The guy I bought it from said he drove it every day up until I bought it. It sat for about 3 weeks before the clutch was fixed because I didn't have money. It's been 2 weeks since it's been "fixed" but hasn't gone anywhere.
Thread
Thread Starter
Forum
Replies
Last Post