i have an 86' 300zx turbo. just swapped the motors and i need some info on how to apply all the vacumm hoses ! i cant find a diagram or anything online or in my haynes manuall. PLZ HELP

well your going to have to have vacuum to your brake booster and all your emmision valves, your going to need a vacuum line to your wastegate on your turbo, one on your BOV/recirculation valve, need one on your fuel psi regualator, IACV etc. did you mark off all the lines before removing them? but this should help a little and get you started. good luck

no i diddnt mark them, the motor is in now and i think for the most part that they are all connected im just not sure if they are right. ill check the brake booster and see whats going on there. i imagine there is a specific order they need to go in ?

no it doesnt matter how the vacuum lines go as long as there supplying vacuum to all the parts that require it to operate properly