Can some one please tell me the best motor to put into my 2dr nissan sentra would it be the maxiama motor 3.5 or pimp out the 2.0 thanks

 

SR20DE = 2.0L

nothing else unless its a DE-T. The 3.5 is to hard of a swap in the B14 chassis.

 

thanks for the help. I thought that the sr20de-t motor was a turbod motor. and how much power can you realy get out of one of those

 

I have seen one person make over a 1000hp. But most people make 250-375hp

 

Holy **** was that motor stable at that kind of power bc i have friends that have hondas at 500+ horse power and they tend to destroy motors or there cv shafts

 

You can get 250hp very easily on a SR20 on stock boost which is around 8psi with minor mods. Hondas are known for breaken CV shafts. Run b13 axles i hear there stronger than b14 axles.

 

All cars that come stock with no torque are gonna break stock CV's easy.....they just aren't built to handle it... nor is a stock 100hp car going to handle 500hp without building the hell out of the motor. Honda's weren't meant to be turbo'd..... but the SR20 motor was, just like 2dr_Sentra said .... 8psi on a basically stock SR20 will make low to mid 200's.